How To Remove Carpet From Under RV Slide Out [6 Step Guide]

You may have a carpet under your RV slide-out. So, you might have a question- is removing the carpet necessary? It is essential to remove the carpet from your RV’s slide-out. 

Nobody likes an old sagging carpet, do they? On the other hand, carpets may add structure to the RV’s interior and aesthetic appeal. 

However, if the carpets produce structural issues in the RV, it will not be safe for you. You should remove the carpet since your RV flooring is also crucial.

But, if you’re wondering how to remove carpet from under RV slide-out, listen. Carpet removal is difficult if you have never done it before. But it’s simple after you’ve followed the appropriate instructions.

We’ve put up a comprehensive step-by-step procedure for you in this post. Furthermore, in the FAQ part, we’ve addressed some frequently asked concerns concerning this issue.

So, let’s get started!

6 Steps To Remove Carpet From Under RV Slide Out

Others may tell you that carpet removal is one of the most challenging tasks in an RV. Most owners are suspicious of changing carpets on their own. Some people are concerned about ruining or spilling their slide out.

Nobody wants to pull the carpet from their RV, do they? But don’t worry, you won’t have to exert more effort than necessary. If you follow the step-by-step instructions below, you should have no trouble completing the work.

So, let’s take a look at what you should be thinking about as you prepare to remove carpet from under RV slide-out:


You will require a set of tools to do this task. They are, nonetheless, readily available in local markets. Furthermore, you won’t have to spend a lot of cash to remove carpet from under RV slide-out because they’re reasonably priced. 

Let’s check out some of the tools:

After you have arranged the tools for the task, let’s look at the whole step-step process:

Step 1: Trim The Carpet’s Edge

Begin by cutting the carpet’s edge with the razor blade. Also, be sure that you begin in the center. You will not be able to cut any paddings beneath the carpet if you do this.

It turns out that many RVs actually have paddings under their carpet, so keep an eye on these.

Step 2: Remove The Carpet

When cutting the carpet from the slide out, pull upwards. This has two advantages: cutting the edges easier, and you won’t accidentally miss any insulation underlying the rug.

Also, use your fingers to lift the carpet to avoid dragging anything from beneath it. This way, you won’t cut anything from beneath the carpet that you shouldn’t.

Moreover, wear protective gloves to avoid inadvertently cutting your fingers.

Step 3: Scrape Off The Glue From Below

Remove the glued sections from the carpet. After that, continue pulling the other areas as previously.

Also, tugging it hard enough will suffice. However, be cautious with the stapled sections.

Step 4: Take Out All Of The Screws

Check that you have removed all the pieces fastened to the floor. But how are you going to accomplish this?

Cut around those sections with a razor blade and remove screws using a screw extractor. However, you may substitute a wrench if you don’t have a screw extractor.

On the other hand, you should use hammers on regions with little nails and screws. A hammer can readily remove those without difficulty.

How does that sound?

You can also use a hammer to create leverage when removing the carpet. It might be challenging to pull them at times, but you can easily use a hammer.

Step 5: Take Care Not To Cut Or Damage The Vinyl Beneath

Ensure your razor blade is up and not too near to the RV’s vinyl. This is because you do not want to harm the vinyl on your RV.

Also, make sure your slide-out height is appropriately set. Imperfect adjustments may result in significant mishaps when working on the carpet.

As a result, using the knife up will not damage the vinyl below. When cutting the carpet, an expert tip is to go slowly.

Step 6: Clean The Removed Parts With A Cleaner

You should clean the removed parts. A standard cleaner will suffice. But first, use a vacuum cleaner and clear the dust from the carpet areas.

The question might pop up: Why should you clean with a vacuum cleaner?

Your floor was, after all, hidden beneath the carpet. As a result, it’s essential that you first clean them. After that, apply the cleanser to the components. After using the cleanser, wipe them clean with a paper towel.

Finally, place the paper towels in a garbage bag to avoid getting your RV soiled. And that’s how you remove the carpet from under RV slide-out.

Frequently Asked Questions [FAQs]

How much does it cost to replace the carpets in an RV?

Replacing the carpets will cost about $600-$6000.

What is the purpose of having carpet on RV slide-outs?

RVs have a carpet to prevent the slide from dragging the main floor as it comes in.

Can I leave my slide-outs open all of the time?

No, the slide-outs take up a lot of room. Keeping them open at all times will cause issues. 

Final Words

That’s all we got for you. Hopefully, reading this post has given you an idea of how to remove carpet from under RV slide-out. You can now easily remove the carpet independently without needing help from specialists. However, you must benefit from trained people if you cannot do it. 

Let us know your thoughts and queries below. We would love to hear from you. Happy Camping!